800/800c Advanced Rolling door systems
Wayne Dalton Rolling Doors have a long history of excellence in the design and construction of doors that have met and often exceeded the needs and expectations of even the most critical projects. With numerous innovations created and experience acquired over the years, Wayne Dalton continues to lead all other manufacturers with both standard and custom-made doors from a variety of materials and colors to meet almost any need.
- Max. Standard Width: 20′
- Max. Standard Height: 20′
- Control Panel: Electronic VFD* Controller with microprocessor
- 800 Curtain: 3″ flat slats (#14 profile),hardened powder coat (gray, beige, white) 22 ga. steel with alternating endlocks.
- 800C Curtain Pattern: 3″ insulated flat slats (#34 profile), hardened powder coat (gray, beige, white) 22 ga. steel front / 24 ga. steel backer with alternating endlocks. R-value of 7.7; Sound Transmission Class rating of 22.
- Flat insulated or non-insulated slat profile in a variety of gauges.
- Vision/ventilation: 5″x3/4″ open fenestration; 5″x3/4″ acrylic vision lite.
- Perimeter seals: surface guide weatherstrip, angled guide brush seal, exterior lintel weather seal, interior weather baffle, high usage guide weatherstrip (do not select if wind load is required).
- Wind load: minimum of +/- 20 psf up to +/- 55 psf; options available to meet up to Dade County – Florida Building Commission High Velocity Hurricane Zone.
- Custom color options.
- Actuators: Loop detectors, radio control, push buttons, motion detectors and pull cords.